baddyna.blogg.se - Inventorcam set x y coordinates of workpiece 3

More lines result in a toolpath that more closely approximates the nominal shape of the spline or surface. How accurately the toolpath matches the desired shape depends largely on the number of lines used. To accommodate this, CAM approximates spline and surface toolpaths by linearizing them creating many short line segments to approximate the desired shape.

Model box point - Select a point on the model bounding box for the triad origin.ĬNC machine contouring motion is controlled using line G1 and arc G2 G3 commands.

Stock box point - Select a point on the stock bounding box for the triad origin.

Selected point - Select a vertex or an edge for the triad origin.

Model origin - Uses the coordinate system (WCS) origin of the current part for the tool origin.

Setup WCS origin - Uses the workpiece coordinate system (WCS) origin of the current setup for the tool origin.

The Origin drop-down menu offers the following options for locating the triad origin: Use this if your model does not contain a suitable point & plane for your operation. This uses both the origin and orientation of the existing coordinate system.

Select coordinate system - Sets a specific tool orientation for this operation from a defined user coordinate system in the model.

Both the X and Y axes can be flipped 180 degrees.

Select X & Y axes - Select a face or an edge to define the X axis and another face or edge to define the Y axis.

Both the Z and Y axes can be flipped 180 degrees.

Select Z axis/plane & Y axis - Select a face or an edge to define the Z axis and another face or edge to define the Y axis.

Both the Z and X axes can be flipped 180 degrees.

Select Z axis/plane & X axis - Select a face or an edge to define the Z axis and another face or edge to define the X axis.

Model orientation - Uses the coordinate system (WCS) of the current part for the tool orientation.

Setup WCS orientation - Uses the workpiece coordinate system (WCS) of the current setup for the tool orientation.

The Orientation drop-down menu provides the following options to set the orientation of the X, Y, and Z triad axes: Specifies how the tool orientation is determined using a combination of triad orientation and origin options.